Statutory Instruments
HALLMARK
Made
3rd December 1998
Laid before Parliament
4th December 1998
Coming into force
1st January 1999
The Secretary of State, being a Minister designated(1) for the purposes of section 2(2) of the European Communities Act 1972(2) in relation to measures relating to articles made of, comprising or resembling precious metals, in exercise of the powers conferred on him by that section and, having consulted the British Hallmarking Council and such other persons as he thinks fit, in exercise of his powers under section 4(7) of the Hallmarking Act 1973(3), hereby makes the following Regulations:-
1. These Regulations may be cited as the Hallmarking (Hallmarking Act Amendment) Regulations 1998 and shall come into force on 1st January 1999.
2.-(1) The Hallmarking Act 1973 shall be amended as follows.
(2) In section 2, there shall be inserted after the words "United Kingdom is a party" in paragraph (c) of subsection (1), the words-
", or
(d)marks struck in an EEA State other than the United Kingdom, being marks which-
(i)have been struck by an independent body in accordance with the law of that State; and
(ii)provide information which is equivalent to the information provided by the marks mentioned in section 4(1)(a)(i) and (ii) of this Act and which is intelligible to consumers in the United Kingdom."
(3) In section 2, there shall be inserted at the end of subsection (2), the words-
", and marks within subsection (1)(d) above are in this Act called "EEA hallmarks"."
(4) In section 2, after subsection (2), there shall be inserted-
"(2A) In this section "EEA State" means a Contracting Party to the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 as adjusted by the Protocol signed at Brussels on 17th March 1993."
(5) In section 2, for the words "such convention or treaty" in subsection (3) there shall be substituted "convention or treaty falling within subsection (1)(c) above".
(6) In section 2, after the words "bears a convention hallmark" in subsection (5)(c) there shall be inserted the words "or an EEA hallmark".
(7) In section 4, in subsection (1)(a), for sub-paragraph (iii), and the word "and" immediately preceding it, there shall be substituted-
"(iii)the pictorial mark, or one of the pictorial marks, specified in paragraph 3 of the said Schedule as respects an article of the precious metal specified opposite thereto in column (1) of the said paragraph assaying to a standard of fineness specified in column (2) of the said paragraph and also so opposite;
(iv)the date letter directed pursuant to paragraph 4 of the said Schedule; and
(v)the mark (if any) directed pursuant to paragraph 5 of the said Schedule;".
(8) In section 4, for subsections (1A) and (2) there shall be substituted-
"(2) Each of the approved hallmarks mentioned in subsection (1)(a)(iii), (iv) and (v) above shall be struck by an assay office on an article only if a request to that effect is made by the person who submits the article to the assay office; but the absence of any such approved hallmark on an article by virtue of this subsection shall not in itself render the article unhallmarked for the purposes of this Act."
(9) In section 4, after the figure "916.6" in subsection (3)(b)(i)(a), there shall be inserted the words "or above".
(10) In section 4, for the figure "950" in subsection (3)(b)(iii) there shall be substituted "the standard of fineness of the article".
(11) In section 4, subsection (4) shall be omitted.
(12) In section 22(1), there shall be inserted after the definition of "dealer"-
""EEA hallmark" has the meaning given by section 2 of this Act;".
(13) In section 22(1), in the definition of "minimum fineness" (contained within the definition of "fineness"), for the figure "925" there shall be substituted the figure "800" and for the figure "950" there shall be substituted the figure "850".
(14) In section 22(1), in the definition of "sponsor's mark" there shall be inserted after the words "as a sponsor's mark for the purposes of this Act" in paragraph b(ii)-
"; or
(c)a mark struck on an article in an EEA State which indicates the manufacturer or sponsor of the article;".
(15) For Part I of Schedule 2 there shall be substituted-
1. Assay office mark
Assay office | Assay office mark |
---|---|
(1) | (2) |
London-¦ | A leopard's head |
Edinburgh-¦ | A castle |
Birmingham-¦ | An anchor |
Sheffield-¦ | A rose |
2. Standard mark
Precious metal | Standard of fineness | Standard mark |
---|---|---|
(1) | (2) | (3) |
Gold | 375 | The figures 375 |
Gold | 585 | The figures 585 |
Gold | 750 | The figures 750 |
Gold | 916.6 | The figures 916 |
Gold | 990 | The figures 990 |
Gold | 999 | The figures 999 |
Silver | 800 | The figures 800 |
Silver | 925 | The figures 925 |
Silver | 958.4 | The figures 958 |
Silver | 999 | The figures 999 |
Platinum | 850 | The figures 850 |
Platinum | 900 | The figures 900 |
Platinum | 950 | The figures 950 |
Platinum | 999 | The figures 999 |
3. Optional pictorial mark
Precious metal | Standard of fineness | Pictorial mark |
---|---|---|
(1) | (2) | (3) |
Gold | 375 | A crown |
Gold | 585 | A crown |
Gold | 750 | A crown |
Gold | 916.6 | A crown |
Gold | 990 | A crown |
Gold | 999 | A crown |
Silver | 925 | A lion passant. In the case of an article struck by the Edinburgh Assay Office, the reference to a lion passant shall be treated as a reference to a lion rampant. |
Silver | 958.4 | The figure of Britannia or a lion passant. In the case of an article struck by the Edinburgh Assay Office, the reference to a lion passant shall be treated as a reference to a lion rampant. |
Silver | 999 | The figure of Britannia or a lion passant. In the case of an article struck by the Edinburgh Assay Office, the reference to a lion passant shall be treated as a reference to a lion rampant. |
Platinum | 950 | An orb surmounted by a cross |
Platinum | 999 | An orb surmounted by a cross |
4. Optional date letter
Such distinct variable letter of the alphabet to denote the year in which the article is marked as may be for the time being directed in writing by the Council.
5. Optional additional mark
Such mark (if any) as may be for the time being directed in writing by the Council."
3. The Schedule to this Order which contains consequential amendments to The Hallmarking (International Convention) Order 1976(4) has effect.
Kim Howells
Parliamentary Under-Secretary of State for Competition and Consumer Affairs,
Department of Trade and Industry
3rd December 1998
1. In article 3(1)(a), before "925" in paragraph (ii) there shall be inserted "800 or".
2. In article 5(2), for sub-paragraph (d) there shall be substituted-
"(d)in subsection (2) the reference to subsection (1)(a)(iii) were omitted;".
3. In article 5(2), in sub-paragraph (e), for "950" there shall be substituted "the standard of fineness of the article".
4. In article 6(1), "800 or" shall be omitted.
5. In article 6(2), in sub-paragraph (a), for "numbers 800 and 830" there shall be substituted "number 830".
6. In article 6(2), sub-paragraph (b) shall be omitted.
7. In article 6(3), "800 or" shall be omitted.
(This note is not part of the Regulations)
These Regulations amend the Hallmarking Act 1973 ("the 1973 Act"). In regulation 2, paragraphs (2), (3), (4), (5), (6), (11), (12) and (14) are made under section 2(2) of the European Communities Act 1972 (the 1972 Act) regulation 2 paragraphs (7), (8), (9), (10), (13) and (15) are made under section 4(7) of the 1973 Act.
The amendments made under the 1972 Act are made for the purpose of making the provisions of the 1973 Act consistent with Article 30 of the E.C. Treaty as explained, in relation to the importation by one Member State of articles made of or comprising precious metals from another Member State, by the European Court of Justice in the case of Houtwipper (Case C-293/93) ([1994] ECR 1-4249). The Judgment of the Court was delivered on 15th September 1994.
The definition of "approved hallmarks" in section 2(1) of the 1973 Act is expanded by the addition of a new paragraph (d). This encompasses marks struck by an independent body in another Member State, which have been struck in accordance with the law of that State and which contain information which is equivalent to that provided by the assay office mark and the standard mark which may be struck under the 1973 Act and which is intelligible to consumers in the United Kingdom (regulation 2(2)).
Articles may, on request to the assay office, be struck with any of three optional marks-a date letter, in accordance with such distinct, variable date letter as directed, in writing, by the British Hallmarking Council (the date letter was previously a mandatory requirement), the relevant pictorial mark denoting the standard of fineness of an article of precious metal (also previously mandatory) and such other mark as may be directed by the British Hallmarking Council (regulation 2(7)). Provision is made to the effect that failure to mark an article of precious metal with any of the three optional marks will not render an article unhallmarked (regulation 2(8)).
In accordance with the amendments to Part I of Schedule 2, the offence relating to provision of information in respect of origin is omitted (regulation 2(11)).
Part I of Schedule 2 is substituted by a new Part. The amendments remove the distinction previously drawn in the Schedule between the assay office mark and standard mark to be affixed to articles made in the United Kingdom and those marks to be affixed to articles made elsewhere. Provision is made for additional finenesses to be struck in the United Kingdom. Part I of Schedule 2 also sets out the three optional marks and provides that in the case of gold, the optional mark may be struck alongside all millesimal fineness marks which United Kingdom assay offices can strike, whilst in the case of silver and platinum, the relevant optional mark may be struck alongside millesimal finenesses over 925 and 950 respectively (regulation 2(15)).
Consequential amendments are made to the Hallmarking (International Convention) Order 1976 (regulation 3).
The Regulations will come into force on 1 January 1999. A Regulatory Impact Assessment has been drawn up by the Department of Trade and Industry and is available from Consumer Affairs Directorate 1e, Bay 464, 1 Victoria Street, London SW1H 0ET (Tel: 0171 215 0328). Copies have been placed in the libraries of both Houses of Parliament.