Statutory Instruments
ROAD TRAFFIC
Made
7th August 1978
Laid before Parliament
16th August 1978
Coming into Operation
15th September 1978
The Secretary of State for Transport, in exercise of the powers conferred by section 160(1), (1A) and (5) of the Road Traffic Act 1972, as amended by section 14 of the Road Traffic Act 1974, and of all other enabling powers, and after consultation with representative organisations in accordance with section 199(2) of the said Act of 1972, hereby makes the following Regulations:-
1. These Regulations shall come into operation on 15th September 1978, and may be cited as the Weighing of Motor Vehicles (Use of Dynamic Axle Weighing Machines) Regulations 1978.
2.-(1) In these Regulations-
"the Act of 1972" means
"authorised person" means
"dynamic axle weighing machine" means
(2) For the purpose of these Regulations any two or more wheels of a vehicle in the same line transversely shall be regarded as wheels of one axle.
(3) The Interpretation Act 1889 shall apply for the interpretation of these Regulations as it applies for the interpretation of an Act of Parliament.
3. Where a motor vehicle or trailer is to be weighed, or the weight transmitted to the road by any parts of the vehicle or trailer in contact with the road is to be tested, by means of a dynamic axle weighing machine, the weighing or testing shall be effected by causing the motor vehicle to be driven, or the trailer to be drawn, across the weighing platform of the machine in accordance with the instructions of an authorised person in charge of the machine in a manner and at a steady speed appropriate for ensuring that-
(a)the machine can show successively the weight transmitted to it by the wheels of each axle of the vehicle or trailer, and
(b)in a case where the machine does not itself automatically make a printed record of each weight, the authorised person in charge of the machine can record each of the weights shown by the machine as such weights are shown.
4. The limits within which, unless the contrary is proved, any weight determined by a dynamic axle weighing machine is to be presumed to be accurate for the purposes of any provision made by or under the Act of 1972 or by or under any other enactment relating to motor vehicles or trailers, are plus or minus 150 kilograms for the wheels of each axle the weight transmitted by which is shown on the machine at any one time and, where the machine also records the sum of the weights transmitted by the wheels of all the axles of a motor vehicle or trailer, plus or minus 150 kilograms multiplied by the number of the axles.
5. In a case where a motor vehicle or trailer is weighed, or the weight transmitted to the road by any parts of the vehicle or trailer in contact with the road is tested, by means of a dynamic axle weighing machine a certificate in the form set out in the Schedule to these Regulations is hereby prescribed for the purposes of subsection (5) of section 160 of the Act of 1972.
William Rodgers
Secretary of State for Transport
7th August 1978
(See Regulation 5)
These Regulations make provision for facilitating the use of dynamic axle weighing machines in order to ascertain the weights transmitted to the road surface by the wheels of each axle of a motor vehicle or trailer, and, in consequence, the gross weight of the motor vehicle or trailer. The manner in which the weighing is to be carried out is indicated in Regulation 3. The limits of presumed accuracy for dynamic axle weighing machines are specified in Regulation 4 and Regulation 5 prescribes a form of certificate of weight to be issued when a dynamic axle weighing machine is used.