ON APPEAL FROM THE HIGH COURT OF JUSTICE, QUEEN'S BENCH DIVISION
LONDON MERCANTILE COURT
HHJ Mackie QC
Strand, London, WC2A 2LL |
||
B e f o r e :
LORD JUSTICE BEATSON
and
LORD JUSTICE UNDERHILL
____________________
(1) Globe Motors, Inc (a corporation incorporated in Delaware, USA) (2) Globe Motors Portugal-Material Electrico Para A Industria Automovel LDA (3) Safran USA Inc |
Claimants/Respondents |
|
- and - |
||
TRW Lucas Varity Electric Steering Limited - and - TRW Limited |
First Defendant/Appellant Second Defendant |
____________________
Paul Lowenstein QC and Rajesh Pillai (instructed by Baker & McKenzie LLP) for the Claimants/Respondents
Hearing dates: 9 and 10 February 2016
____________________
Crown Copyright ©
Lord Justice Beatson :
I. Overview
II. The Agreement
"A. Buyer [TRW Lucas] wants to purchase from Supplier [Globe] Brushless electric motor and leadframe assembly produced in accordance with the specifications attached as Appendix A ("Products") to be used in conjunction with EPS systems.
B. Supplier wants to sell Products to Buyer."
"Buyer will purchase from Supplier all of Buyer's requirements of the Products and Supplier will sell to Buyer all such quantities of Products as Buyer [may] order from time to time pursuant to this Agreement."
Exclusivity is also addressed in the last sentence of Article 1.1 which states:
"Supplier shall not sell the part numbers referenced in this agreement to a third party".
"The Products include, but are not limited to, (i) motors and leadframe assembly for 38Nm Nissan B/Renault P1. (ii) motors and leadframe assembly for 58Nm Fiat C192, and (iii) motors and leadframe assembly for 58Nm Renault P2. The parties may add additional products by mutual agreement."
"4.1 General: Buyer reserves the right to propose, at any time, changes in the Specifications or other requirements relating to the Products (''Engineering Changes"). Supplier has to mutually agree. Buyer will advise Supplier of all Engineering Changes by giving Supplier prior written notice. If Supplier proposes to make an Engineering Change, Supplier will advise Buyer of such proposal. Before making such proposed Engineering Change, Supplier must obtain prior written approval from Buyer.
4.2 Effects of Change: Following notice of an Engineering Change by Buyer or of a proposed Engineering Change by Supplier, Supplier will use all reasonable efforts in cooperation with Buyer to minimize the effects of such Change and will submit to Buyer as soon as reasonably practicable a written statement of the anticipated effects of such Change on production costs, delivery schedules, and matters related thereto.
4.3 Cost: Buyer will reimburse Supplier for all reasonable costs associated with each Engineering Change made by Buyer within ninety (90) days following its receipt of Supplier's invoice for such costs, which such invoice will not be issued prior to the implementation of such Change. Such costs will include reasonable costs related to surplus inventory and obsolete Products, tooling, and equipment. Buyer and Supplier will negotiate, in good faith, the allocation of costs associated with each Engineering Change proposed by Supplier."
"The quantities will depend upon the requirements of Buyer's customers (currently Fiat, Nissan, Renault). At present, Buyer estimates that it will require the following ".
There is then a table setting out the estimated volumes for the Products referred to in Article 1.1 for years from the inception of the Agreement until 2011. In the case of the 38Nm Nissan B/Renault P1 platform, with which this appeal is concerned, the estimates are from 2002 2006 and the volumes are 225k, 475k, 743k, 1081k, and 1081k. It is stated that "variance is estimated at +/-15%." These estimates, together with Article 5 about the term of the Agreement (see [19] below), were relied on by Globe and the judge to show the long-term nature of the Agreement.
"The supplier has committed to produce the products at a European manufacturing location as soon as practicable - anticipated to be in 2002."
"The parties acknowledge and agree that Supplier shall recover its costs of tooling and capital by amortizing such costs over the units to be sold over the first five (5) years of this Agreement (''Recovery Period"). During the Recovery Period, the volume of Buyer's purchases of each Product shall be reviewed the first month of each year following the initial year of the agreement. In the event that the aggregate volume of Buyer's purchases of each Product during the preceding years is less than that which is provided in Article 1.2 above and such variance is greater than fifteen percent (15%), then Supplier shall adjust its pricing so as to amortize the remainder of Supplier's tooling and capital costs over the forecasted units to be produced for the remainder of the Recovery Period. If, at the end of the Recovery Period, Supplier shall not have fully recovered its tooling and capital costs, then Supplier shall invoice Buyer for the remaining portion of such costs and Supplier shall pay on such invoice within ninety (90) days following its receipt of such invoice."
"The Term of this Agreement will begin on the Effective Date and shall continue for the lifetime of each of the platforms at a rate of 100% of the platform requirement as estimated in Article 1.2."
Articles 5.2 and 5.3 deal with termination on insolvency and material breach, and the rights of each party after termination.
"6.3 Entire Agreement; Amendment: This Agreement, which includes the Appendices hereto, is the only agreement between the Parties relating to the subject matter hereof. It can only be amended by a written document which (i) specifically refers to the provision of this Agreement to be amended and (ii) is signed by both Parties."
III. The facts
IV. The judgment
(a) Issues 1 3: The meaning of "Products" and "Engineering Changes"
"I see no reason why a motor which evolves from a Gen 1 through the process in Article 4 is not as subject to the Agreement as any other given the wording of the Agreement and its long term and exclusive nature in an area of industry where regular improvement and development is obviously expected. This is not an agreement just for the Products in existence at the outset. There will be changes and these will be given effect to by Article 4 if they fall within its terms or otherwise by agreement, if that be forthcoming. I do not see this approach as requiring any implication of terms or doing violence to the language of the Agreement. Neither do I see it as sufficiently unclear to warrant investigation of whether the approach produces results that are very unreasonable or which flout business commonsense." (judgment, [225])
(b) Issue 4: Was Globe obliged to implement proposed Engineering Changes, and was TRW Lucas obliged to ask Globe to implement Engineering Changes to a Product?
(c) Issues 5 6: Differences between the Gen 1 and Gen 2 motors
(d) Issues 7 -9: Were the changes Globe stated they could and would make to produce a Gen 2 motor "Engineering Changes", within what timeframe would Globe have made those changes, and would the Globe Gen 2 have been a direct substitute for the Emerson Gen 2 motor?
"[E]ven minimal compliance by TRW would have been likely to produce an acceptable result. TRW wanted Renault's business and had a contractual obligation to source the motor through Globe. TRW had in the past worked well with Globe and, it was clear from the evidence in this case, would have willingly worked with it again if required to do so." (judgment, [349])
He also stated:
"TRW had the right to impose its own requirements for the motors upon Globe. The agreement does not permit Globe simply to build what it likes as long as it meets the requirements that Renault can be persuaded to accept. A consequence of TRW entering into the Agreement, however, is its commitment to buy and Globe's obligation to sell products. A line has to be drawn somewhere, but not in this case, between two considerations. First, there are TRW's legitimate detailed requirements, including no doubt technical changes which might be seen as not essential but desirable as the way forward to future improvements. Secondly, there are changes which Globe could not accommodate at reasonable cost or at all with the result that it was not able to obtain its rights to supply under the agreement or could not be compelled to supply a Product which was commercially unattractive to it." (judgment, [352])
(e) Issue 17: Did Porto have a right of action against TRW Lucas under the Agreement?
V. The grounds of appeal
(1) Ground 1: Erroneous extended definition of "Products": The judge erred in construing the Agreement as including within the definition of "Products": "motors and lead frame assemblies built to different specifications from the Globe Gen 1 specification, where [TRW Lucas] required those motors and leadframe assemblies for the platforms identified in the Agreement" where two conditions were satisfied. The first was that "those motors were comprised of motors and leadframe assemblies initially produced by [Globe] but with changes to their specifications or other requirements". The second was that Globe "could and would have produced those motors and leadframe assemblies by making Engineering Changes to the motors and leadframe assemblies that it initially supplied to [TRW Lucas] under the Agreement, under Article 4.1": Issue 2. Issues 10 and 12 are also relevant to the determination of this ground.(2) Ground 2: "38 Nm" EPAS system: The judge erred in deciding that the phrase "38Nm" used in Articles 1.1 and 1.2 of the Agreement did not limit the scope of the motors to be covered by the Agreement to those which were to be used in a power steering system of that rating so far as the Renault P1 platform was concerned: Issue 3.
(3) Ground 3: "Engineering Changes": As formulated, this is that the judge erred in finding that the Globe Gen 2 power steering system could be derived from the Globe Gen 1 system by making only "Engineering Changes" to the latter: Issue 7. It was argued that the judge had failed to resolve the correct issue but had decided whether Globe was capable of implementing the changes necessary to derive the Globe Gen 2 from the Globe Gen 1.
(4) Ground 4: "Direct substitute": The judge erred in finding that the motors for the Globe Gen 2 power steering system were or would be a "direct substitute" for the motor for the Emerson Gen 2 power steering system given the differences in structure, design and function between the two motors that were common ground between the parties and/or were found by the judge: Issue 9.
(5) Ground 5: Erroneous "hypothetical counter factual" inquiry: The judge erred in finding that Globe "could and would" have been able to produce the Globe Gen 2 motor by inferentially applying a hypothetical counterfactual assumption in order to determine that TRW Lucas had a duty to co-operate with Globe in developing the Globe Gen 2 motor: Issue 8.
(6) Ground 6: There was no variation of the Agreement to include Porto as a party: The judge erred in finding that Porto became a party to the Agreement by means of an implied novation or variation by conduct because (a) the conduct relied on was not unequivocal, and (b) Article 6.3 of the Agreement precluded variation by parol: Issue 17.
VI. Discussion
(a) The approach to interpretation
"Courts will never construe words in a vacuum. To a greater or lesser extent, depending on the subject matter, they will wish to be informed of what may variously be described as the context, the background, the factual matrix or the mischief. To seek to construe any instrument in ignorance or disregard of the circumstances which gave rise to it or the situation in which it is expected to take effect is in my view pedantic, sterile and productive of error. But that is not to say that an initial judgment of what an instrument was or should reasonably have been intended to achieve should be permitted to override the clear language of the instrument, since what an author says is usually the surest guide to what he means. To my mind construction is a composite exercise, neither uncompromisingly literal nor unswervingly purposive: the instrument must speak for itself, but it must do so in situ and not be transported to the laboratory for microscopic analysis."
The second is the summary of the current position by Lord Neuberger in Arnold v Britton [2015] UKSC 36, [2015] AC 1619 at [15]. He stated:
"When interpreting a written contract, the court is concerned to identify the intention of the parties by reference to "what a reasonable person having all the background knowledge which would have been available to the parties would have understood them to be using the language in the contract to mean", to quote Lord Hoffmann in Chartbrook Ltd v Persimmon Homes Ltd [2009] UKHL 38, [2009] 1 AC 1101, para 14. And it does so by focussing on the meaning of the relevant words, in this case clause 3(2) of each of the 25 leases, in their documentary, factual and commercial context. That meaning has to be assessed in the light of (i) the natural and ordinary meaning of the clause, (ii) any other relevant provisions of the [contract], (iii) the overall purpose of the clause and the [contract], (iv) the facts and circumstances known or assumed by the parties at the time that the document was executed, and (v) commercial common sense, but (vi) disregarding subjective evidence of any party's intentions. "
This substantially repeats what he stated in Marley v Rawlings [2014] UKSC 2, [2015] AC 129 at [19].
(a) "The less clear [the centrally relevant words] are the more ready the court can properly be to depart from their natural meaning", but "the clearer the natural meaning, the more difficult it is to justify departing from it": see [18].
(b) "[W]hen interpreting a contractual provision, one can only take into account facts or circumstances which existed at the time the contract was made, and which were known or reasonably available to both parties": at [21].
(c) The reliance placed on commercial common sense "should not be invoked to undervalue the importance of the language of the provision which is to be construed" (see [17]) and, (at [19]) that "commercial common sense is not to be invoked retrospectively" so that the mere fact that a contractual arrangement, if interpreted according to its natural language, has worked out badly or even disastrously for one of the parties is not a reason for departing from the natural language.
On this last factor, see also Lord Hodge at [76] [79]. I add that the commercially sensible meaning is often not obvious, and, where it is not, the court is less likely to be able to conclude that one of two or more alternatives is the commercially more sensible one: see e.g. Cottonex Anstalt v Patriot Spinning Mills Ltd [2014] EWHC 236 (Comm), [2014] 1 Lloyd's Rep 615 at [57] [58] per Hamblen J.
"a court may take into account that, by reason of the changing conditions affecting such a contract, a flexible approach may best match the reasonable expectations of the parties. But, as in the case of all contracts, loyalty to the contractual text viewed against its relevant contextual background is the first principle of construction."
(b) Ground 1: Does the Gen 2 motor which Globe "could and would have built" fall within the definition of "Products" in the Agreement?
(c) Grounds 2 5
(d) Ground 6: There was no variation of the Agreement to include Porto as a party:
"Wright J was incontestably right in concluding
(a) that no oral variation of the written terms could have any legal effect, and
(b) that in any event Mr Lateef had no authority, either actual or ostensible, to bind the Bank.
This being so, nothing in the arguments advanced below or now advanced can afford a defence."
Permission to appeal was subsequently given by Potter LJ. In his judgment dismissing the appeal, Thorpe LJ, with whom Mantell LJ agreed, adopted the reasons given by Sedley LJ.
VII. Conclusion
Lord Justice Underhill:
Lord Justice Moore-Bick: