Court of Justice of the European Communities (including Court of First Instance Decisions)

You are here: BAILII >> Databases >> Court of Justice of the European Communities (including Court of First Instance Decisions) >> Kwang Yang Motor v OHMI - Honda Giken Kogyo (Moteur a combustion interne) (Intellectual property) [2011] EUECJ T-10/08 (09 September 2011)
URL: http://www.bailii.org/eu/cases/EUECJ/2011/T1008.html
Cite as: [2011] EUECJ T-10/08, ECLI:EU:T:2011:446, [2011] EUECJ T-10/8, EU:T:2011:446

[New search] [Contents list] [Help]

IMPORTANT LEGAL NOTICE - The source of this judgment is the web site of the Court of Justice of the European Communities. The information in this database has been provided free of charge and is subject to a Court of Justice of the European Communities disclaimer and a copyright notice. This electronic version is not authentic and is subject to amendment.

JUDGMENT OF THE GENERAL COURT (First Chamber)

9 September 2011 (*)

(Community design – Invalidity proceedings – Registered Community design representing an internal combustion engine with the vent on the top – Earlier national design – Ground for invalidity – No individual character – Visible features of a component part of a complex product – No different overall impression – Informed user – Degree of freedom of the designer – Articles 4, 6 and 25(1)(b) of Regulation (EC) No 6/2002)

In Case T-�10/08,

Kwang Yang Motor Co., Ltd, established in Kaohsiung (Taiwan), represented by P. Rath, W. Festl-Wietek and M. Wetzel, lawyers,

applicant,

Office for Harmonisation in the Internal Market (Trade Marks and Designs) (OHIM), represented by G. Schneider, acting as Agent,

defendant,

the other party to the proceedings before the Board of Appeal of OHIM, intervener before the General Court, being

Honda Giken Kogyo Kabushiki Kaisha, established in Tokyo (Japan), represented by T. Musmann, H. Timmann, M. Büttner and S. von Petersdorff-Campen, lawyers,

ACTION brought against the decision of 8 October 2007 of the Third Board of Appeal of OHIM (Case R 1337/2006-3), relating to invalidity proceedings for Community designs between Honda Giken Kogyo Kabushiki Kaisha and Kwang Yang Motor Co., Ltd,

THE GENERAL COURT (First Chamber),

composed of J. Azizi (Rapporteur), President, E. Cremona and S. Frimodt Nielsen, Judges,

Registrar: E. Coulon,

having regard to the application lodged at the Registry of the Court on 7 January 2008,

having regard to the response of OHIM lodged at the Registry of the Court on 23 May 2008,

having regard to the response of the intervener lodged at the Registry of the Court on 5 May 2008,

further to the hearing on 2 February 2011,

gives the following

Judgment

Background to the dispute

1 On 2 April 2004, the applicant Kwang Yang Motor Co., Ltd, filed an application for registration of a Community design with the Office for Harmonisation in the Internal Market (Trade Marks and Designs) (OHIM), pursuant to Council Regulation (EC) No 6/2002 of 12 December 2001 on Community designs (OJ 2002 L 3, p. 1).

2 The design for which registration is sought is represented as follows:

3 The challenged design is intended to be applied to an ‘internal combustion engine’ in Class 15.01 of the Locarno Agreement Establishing an International Classification for Industrial Designs of 8 October 1968, as amended.

4 The challenged design was registered on 2 April 2004 as a Community design under No 163290-0001 and published in the Community Designs Bulletin No 2004/055 of 29 June 2004.

5 On 17 May 2005, the intervener, Honda Giken Kogyo Kabushiki Kaisha filed an application with OHIM for a declaration of invalidity with respect to the challenged design pursuant to Article 52 of Regulation No 6/2002. The ground relied on in support of the application for a declaration of invalidity was that referred to in Article 25(1)(b) of Regulation No 6/2002, since the design does not fulfil the requirements for protection in Articles 4 to 6 thereof for lack of new and individual character. It claimed, inter alia, that the challenged design was identical to that protected by the design registered in the United States under Reference D367070 (‘the earlier design’), which is represented as follows:

6 By decision of 17 August 2006 the Invalidity Division rejected the application for invalidity on the ground that, pursuant to Article 4(2) of Regulation No 6/2002, the features of a complex product which are not visible during its normal use should be left aside when considering the novelty and individual character of the product in question. It held, therefore, that only features of the engine that remain visible when it is installed on the apparatus should be looked at, which is particularly relevant as regards the upper part of the engine. It was not identical to the earlier design. It held that their visible features present various differences, so that the challenged design is new. Neither was the challenged design devoid of individual character in so far as the upper side of the engine produced a different impression on the informed user on account of differences in shape and position of certain component parts.

7 On 16 October 2006, the intervener appealed under Articles 55 to 60 of Regulation No 6/2002 against the decision of the Invalidity Division.

8 By decision of 8 October 2007 (‘the contested decision’), the Third Board of Appeal annulled the Invalidity Division’s decision and declared the challenged design to be invalid on the ground that it lacked individual character, within the meaning of Article 6 of Regulation No 6/2002, because it produced on an informed user an overall impression that did not differ from that produced by the earlier design (paragraph 13 of the first contested decision). It held that an internal combustion engine was a component part of a complex product within the meaning of Article 4(2) of Regulation No 6/2002 (paragraph 15 of the contested decision). Moreover, it held that it was not contested that one of those complex products was a lawnmower (paragraph 15 of the contested decision). When the engine was installed on a lawnmower, the component parts of the engine that remain visible during normal use of the complex product were primarily the upper side, then the front side and the lateral sides, whereas the rear side was less visible and the underside was not visible (paragraph 18 of the contested decision). As regards the individual character of the challenged design, the Board of Appeal held that it should be assessed on the basis of the overall impression produced primarily by the upper side of the engine on an informed user of lawnmowers. It defined the latter as someone who wishes to use a lawnmower and has become informed on that subject (paragraph 19 of the contested decision).

9 The Board of Appeal also held that, as regards the comparison of the overall impression produced by the challenged design and that produced by the earlier design, the overall impression produced on an informed user of lawnmowers is determined by the overall appearance of the upper side of the engine and, therefore, of the arrangement of the various components of the engine, their shape and their size relative to each other, and not by multiple technical details. It observed that the components of the designs at issue are identically placed and the shapes were very similar. It stated, in particular, that there was a difference as to the placing of the starter motor but that that difference did not alter the overall impression produced by the engine on an informed user (paragraphs 14 to 35 of the contested decision). Finally, the Board of Appeal held that designers of combustion engines have a high degree of freedom (paragraph 36 of the contested decision) and that this reinforced the conclusion that the challenged design produced the same overall impression on an informed user as the earlier design (paragraph 37 of the contested decision).

Forms of order sought

10 The applicant claims that the Court should:

– annul the contested decision;

– order OHIM to pay the costs.

11 OHIM and the intervener contend that the Court should:

– dismiss the action;

– order the applicant to pay the costs.

Law

12 The applicant puts forward a single plea, claiming essentially, infringement of Article 4(2) of Regulation No 6/2002, read in conjunction with Article 6 thereof.

13 In that plea, the applicant claims that the differences between the designs at issue are such that the overall impressions produced on an informed user are different and that the challenged design is not devoid of individual character. In that connection, it challenges the Board of Appeal’s assessment concerning the visible parts of the engine during its use. Furthermore, it claims that the freedom of the designer when developing the challenged design is limited.

14 OHIM and the intervener contest the applicant’s arguments.

15 The intervener claims that certain documents lodged by the applicant with its application are inadmissible as they were produced for the first time before the Court.

Overview

16 Under Article 4(1) of Regulation No 6/2002, the protection of a Community design is dependent on its being new and having individual character. Furthermore, according to Article 4(2) of Regulation No 6/2002, a design which constitutes a component part of a complex product is only considered to be new and to have individual character if the component part, once it has been incorporated into the complex product, remains visible during normal use and to the extent that those visible features of the component part fulfil in themselves the requirements as to novelty and individual character.

17 Article 6(1)(b) of Regulation No 6/2002 also states that the individual character must be assessed, in the case of a registered Community design, in light of the overall impression produced on an informed user, which must be different from that produced by any design made available to the public before the date of filing of the application for registration or, if priority is claimed, before the date of priority. Article 6(2) of Regulation No 6/2002 states that in assessing individual character, the degree of freedom of the designer in developing the design is to be taken into consideration.

18 Therefore, in assessing the individual character of the challenged design, it must be examined whether the overall impression that that design produces on an informed user is different from that produced by earlier designs existing before 2 April 2004, in particular, the design relied on by the applicant in support of the application for a declaration of invalidity, taking account of the degree of freedom enjoyed by the designer when developing the design.

19 For a design constituting a component part of a complex product, like that in the present case, it is necessary to determine the parts which remain visible during normal use of the complex product and whether the visible features of that component part produce on an informed user an overall impression different from that produced by another design which was made available to the public before 2 April 2004.

The classification of the challenged design as a component part of a complex product

Design challenged as a component part of a complex product

20 The applicant has accepted that the challenged design constituted an internal combustion engine which could be incorporated into a lawnmower. Therefore, it must be considered that the challenged design constitutes a component part of that complex product. Furthermore, it is common ground that internal combustion engines are generally used for lawnmowers. The incorporation of the challenged design into a lawnmower may therefore serve as a basis for determining, first, whether the challenged design remains visible during normal use of the complex product, in particular, a lawnmower, by the end user and, second, whether the overall impression produced on an informed user by the visible features differ from that produced by another design which was made available to the public before 2 April 2004.

Visible parts of the component part during normal use

21 The applicant challenges the Board of Appeal’s assessment that the parts of the challenged design remaining visible during normal use of the complex product, once the engine is mounted on the lawnmower, are principally the upper side of the motor, then the front and lateral sides, whereas the rear side is less visible and the underside is not visible at all (paragraph 18 of the contested decision). It takes the view that the rear side and underside of the engine must not be neglected.

22 In that connection, it must be considered that the Board of Appeal’s assessment is not vitiated by any error. During the normal use of a lawnmower, it is placed on the ground and the user stands behind the lawnmower. Thus, the user, standing behind the lawnmower sees the engine from the top and therefore sees principally the upper side of the engine. It follows that the upper side of the engine determines the overall impression produced by the engine.

The individual character

The informed user

23 According to the case-law, an ‘informed user’ within the meaning of Article 6 of Regulation No 6/2002 is neither a manufacturer nor a seller of the products in which the designs at issue are intended to be incorporated or to which they are intended to be applied. An informed user is particularly observant and has some awareness of the state of the prior art, that is to say the previous designs relating to the product in question that had been disclosed on the date of filing of the contested design (Case T-�9/07 Grupo Promer Mon Graphic v OHIM – Pepsico (Representation of a Circular Promotional Item) [2010] ECR II-�0000, paragraph 62).

24 Furthermore, the status of ‘user’ implies that the person concerned uses the product in which the design is incorporated, in accordance with the purpose for which that product is intended (Case T-�153/08 Shenzhen Taiden v OHIM – Bosch Security Systems (Communications Equipment) [2010] ECR II-�0000, paragraph 46).

25 The qualifier ‘informed’ suggests in addition that, without being a designer or a technical expert, the user knows the various designs which exist in the sector concerned, possesses a certain degree of knowledge with regard to the features which those designs normally include, and, as a result of his interest in the products concerned, shows a relatively high degree of attention when he uses them (Communications Equipment, paragraph 47).

26 However, that factor does not imply that the informed user is able to distinguish, beyond the experience gained by using the product concerned, the aspects of the appearance of the product which are dictated by the product’s technical function from those which are arbitrary (Communications Equipment, paragraph 48).

27 Therefore, an informed user is a person having some awareness of the existing designs in the sector concerned, without knowing which aspects of that product are dictated by technical function.

28 In the present case, the Board of Appeal defined an informed user of a lawnmower as being someone wishing to use such a mower, who, for example, needs to purchase one and who has become informed on the subject.

29 The applicant has not challenged that assessment as such. It has argued however, in another context, that the internal combustion engine that constitutes the challenged design is sold to manufacturers of, for example, lawnmowers, air compressors, electric generators, pumps and other items, in which internal combustion engines are installed, and not to the end user.

30 In that connection, it must be observed that the definition of an informed user adopted by the Board of Appeal in the challenged decision is correct. As stated in paragraph 20 above, account must be taken, in the present case, of the normal use of a lawnmower. Therefore, the Board of Appeal has not committed any error in holding that an informed user was a person wishing to use a lawnmower, who, for example, needs to purchase one and who has become informed on the subject.

The designer’s degree of freedom

31 In the assessment of the individual character of the designs at issue, its visible features and therefore the overall impression on the informed user of the design, the designer’s degree of freedom in developing the challenged design must be taken into account (see, to that effect, Representation of a Circular Promotional Item, paragraph 72).

32 As the Court has recognised in its decisions, the designer’s degree of freedom in developing his design is established, inter alia, by the constraints of the features imposed by the technical function of the product or an element thereof, or by statutory requirements applicable to the product. Those constraints result in a standardisation of certain features, which will thus be common to the designs applied to the product concerned (Representation of a Circular Promotional Item, paragraph 67).

33 Therefore, the greater the designer’s freedom in developing the challenged design, the less likely it is that minor differences between the designs at issue will be sufficient to produce a different overall impression on an informed user. Conversely, the more the designer’s freedom in developing the challenged design is restricted, the more likely minor differences between the designs at issue will be sufficient to produce a different overall impression on an informed user. Therefore, if the designer enjoys a high degree of freedom in developing a design, that reinforces the conclusion that the designs which do not have significant differences produce the same overall impression on an informed user.

34 In the present case, the Board of Appeal held that the designers of internal combustion engines had a high degree of freedom in designing such engines. It took the view that no limit was imposed as to the shape of the upper side of those engines and that the components of the engines concerned could be positioned differently without altering the functionality or the aesthetic considerations.

35 That finding is challenged by the applicant, which asserts that the technical and functional requirements for internal combustion engines considerably restrict the designers in developing designs for such engines.

36 In that connection, it must be observed that, in the case in the main proceedings, while certain components of internal combustion engines, such as the fuel tank and the vent are essential and must be present in any internal combustion engine, their shape, configuration and their placement are not dictated by technical and functional constraints. Therefore, the general appearance of the internal combustion engine, particularly the appearance of the upper side thereof, is not determined by technical constraints and the designer of the internal combustion engine is free to choose the shape of the components of that engine and their position.

37 As appears from the representations of engines produced by the intervener during the proceedings before OHIM and the General Court, there are designs for internal combustion engines in varying shapes and configurations which differ considerably from those used in the challenged design. Internal combustion engines exist in a wide variety of shapes and combinations of components, as the informed user of such an engine, who has some knowledge of the relevant industrial sector, is aware. Those documents show, for example, that the fuel tank may also be placed on the lateral side of the engine rather than on the top, and that the air filter may also be positioned on the lateral or underside of the engine. Thus there are differences between the shapes of the components of an internal combustion engine and their arrangement, which shows the possibility of variations and differences in the design of internal combustion engines. It follows that the placement of those components is not dictated by functional requirements. Therefore, the general appearance of the visible features of the internal combustion engine is not determined by technical constraints. Since the positioning and shape of the components of an internal combustion engine are not limited by any particular technical necessity, the designer’s degree of creativity with respect to such internal combustion engines is not limited.

38 It follows that the Board of Appeal has not committed an error in holding that the designers of internal combustion engines enjoy a high degree of freedom in the development of designs relating to those internal combustion engines, including the challenged design.

The comparison of the overall impressions produced by the visible features of the internal combustion engines and the conclusion on the individual character of the challenged design

39 The Board of Appeal took the view that the overall impression produced by the challenged design was the same as that produced by the earlier design on account of similarities of shape, position and relative size of the various components of the internal combustion engine.

40 The Board of Appeal held that the overall impression produced on an informed user was principally determined by the general appearance of the upper side of the engine, and by the position of the various components of the internal combustion engine, their shape and size in relation to each other, and not by a multitude of technical details.

41 The applicant challenges the Board of Appeal’s assessment. It argues that the overall impression produced by the challenged design is different from that produced by the earlier design. It claims that even slight differences must be taken into consideration in the assessment of the individual character of the designs at issue. In that connection, it submits a detailed analysis of those designs and concludes that the features of those designs are not identical and that, therefore, the overall impressions that the designs at issue produce are different.

42 In that connection, it must be held that the Board of Appeal’s assessment is not vitiated by an error. The upper sides of the designs at issue, which are the most visible during the normal use of the complex products in which the internal combustion engines are incorporated, are similar in appearance, both as regards the general shape of the internal combustion engines and as regards their components and their position. The central part of the body of the internal combustion engine is essentially rectangular, slightly elongated and rounded in each of the designs at issue. Furthermore, the air vents are situated in the same place and are circular in shape in each of the designs at issue. In addition, the designs at issue have the same basic structure, with five basic modules: the top casing, the vent, the fuel tank, the air filter casing and the muffler cover. Their principal components are arranged identically. The components other than the main fuel tank are arranged in the same manner around the fuel tank. On the designs at issue, the vents have the same circular shape, similar dimensions and openings of similar shapes, emerge vertically from the casing of the internal combustion engine and are situated in the same place, that is, on the upper side close to the rear side. The designs at issue are also alike as regards the appearance of the front side, the components and elements are arranged in the same way with similar proportions. The shape of the lateral sides of the internal combustion engines is also similar. Not only are the proportions, arrangement, layout, size and shape of the components of the internal combustion engines almost identical, but the placing of the screws is also almost identical.

43 The shape, dimensions and arrangement of the various components of the internal combustion engine are more important than differences in details. The two designs at issue produce identical impressions on account of the shape and arrangement of their principal components and have the same basic structure.

44 The details relied on by the applicant cannot have any impact on the overall impression produced on an informed user by the two internal combustion engines represented by the designs at issue. An informed user will be guided by the basic structures alone and not by differences in the details, which do not produce different overall impressions on him.

45 It is clear from all of the foregoing that the Board of Appeal has not committed an error in its assessment of the individual character of the designs at issue, as the overall impression produced on an informed user by the challenged design does not differ from that produced by the earlier designs, including the earlier design registered in the United States.

46 Therefore, the applicant’s single plea and the action in its entirety must be dismissed, without there being any need to give a ruling on the admissibility, challenged by the intervener, of certain documents submitted by the applicant to the Court.

Costs

47 Under Article 87(2) of the Rules of Procedure of the Court, the unsuccessful party is to be ordered to pay the costs if they have been applied for in the successful party’s pleadings.

48 Since the applicant has been unsuccessful, it must be ordered to pay the costs in accordance with the forms of order sought by OHIM and the intervener.

On those grounds,

THE GENERAL COURT (First Chamber)

hereby:

1. Dismisses the action;

2. Orders Kwang Yang Motor Co., Ltd to pay the costs.

Azizi

Cremona

Frimodt Nielsen

Delivered in open court in Luxembourg on 9 September 2011.

[Signatures]

* Language of the case: English.